Wraps, Strips and Putties

DESCRIPTION: Precured dry intumescent strips and compressible foam used in head-of-wall, wall-to-wall and bottom-of-wall joint applications both static and dynamic.

FEATURES:

• Quick and easy one step installation
• Not affected by temperature
• No hazardous ingredients
• No mechanical fastening required

PERFORMANCE: UL Classified system up to 2 hrs in gypsum walls; tested in accordance with ASTM E1966 (UL 2079) and ASTM E90; L Rating < 1 CFM/LF; STC Rating 64; Compliant with the Buy America Act

DESCRIPTION: Flexible, precured dry intumescent strips installed as an integral part of fire door assemblies to provide a positive pressure seal in the clearance area between the door and frame, at the assembly threshold, through hardware such as closers and locks, or in frame assemblies utilizing fire-rated glass in both doors and side lites.

FEATURES:

• Intumescent expands at the exposure of heat, forming a refractory char that tightly seals preventing the spread of flame, smoke and toxic fumes
• Easy to install; ready to use
• Virtually air-tight butterfly damper rubber gasket delivers superior seal when closed
• Cost effective; less material required
• Highly versatile, flexible

PERFORMANCE: Tested in accordance with ASTM E1966 (UL 2079), DIN 4102-1, the fire door standards UL 10C and NFPA 252, and complies with the requirements of IBC 716.2; VOC compliant (CDPH Standard Method v1.2); complies to Required Environmental Exposure Testing of Accelerated Aging and High Humidity as per UL 1479 Fire Test of Through-Penetration Firestops; Compliant with the Buy America Act

DESCRIPTION: Flexible, precured dry intumescent strips used for concrete & masonry floor & wall joints up to 2″ (51 mm) wide, duct insulation and up to 4″ PVC/CPVC & membrane penetrations.

FEATURES:

• Intumescent expands at the exposure of heat, forming a refractory char that tightly seals preventing the spread of flame, smoke and toxic fumes
• Easy to install; single-sided application
• Highly versatile, flexible; economical
• May be covered with any color standard architectural caulk; no firestop caulk required

PERFORMANCE: UL Classified system up to 3 hrs; tested in accordance with ASTM E814 (UL 1479) & ASTM E1966 (UL 2079); VOC compliant (CDPH Standard Method v1.2); complies to Required Environmental Exposure Testing of Accelerated Aging and High Humidity as per UL 1479 Fire Test of Through-Penetration Firestops; Compliant with the Buy America Act

DESCRIPTION: Moldable, non-curing, single-component, intumescent pliant in pad form for through-penetration systems.

FEATURES:

• Intumescent expands at the exposure of heat, forming a refractory char that tightly seals preventing the spread of flame, smoke and toxic fumes
• For interior use with various penetrations (cabling, EMT pipe, conduit, etc.); no volatile solvents (particularly useful when installing in confined spaces or occupied areas); does not have asbestos fillers
• Easy to install; applied by hand; no curing time; adheres to all common building surfaces
• Helps provide a barrier or buffer for energized bus ducts or conduits as well as provide a barrier from vibration and movement; no additional putty material needed to plug end of each electrical metallic tube or conduit as its connection to the box
• Required by Building Codes in rated partitions where horizontal separation of opposite facing electrical boxes is under 24 inches

PERFORMANCE: UL Classified system up to 3 hrs; tested in accordance with ASTM E814 (UL 1479) and ASTM E119 (UL 263); STC Rating 60; only 1/8″ thickness needed for 1-2 hr fire rating; tested by a third party independent laboratory to the ASTM G21 standard with Fungal Growth Rating results of zero; Compliant with the Buy America Act